amiga-news DEUTSCHE VERSION
.
Links| Forums| Comments| Report news
.
Chat| Polls| Newsticker| Archive
.


.
  Per page
Show titles only
.


Archiv 'New hardware and software products'


04.Apr.2010



Inofficial graphics.library 40.25 beta 6 for AmigaOS 3
For a certain period an user has been publishing beta versions of an optimized and bug fixed of the graphics.library which include several patches like FBlit, FText or BlazeWCP. (cg) (Translation: dr)

[News message: 04. Apr. 2010, 16:56] [Comments: 0]
[Send via e-mail]  [Print version]  [ASCII version]
04.Apr.2010
morphzone.org (Webseite)


MorphOS: Ambient background picture by Patrick Jung
Patrick Jung has published a self-made MorphOS background picture in different solutions and colours.

Ring_Morphos.lha (6,3 MB) (cg) (Translation: dr)

[News message: 04. Apr. 2010, 15:47] [Comments: 0]
[Send via e-mail]  [Print version]  [ASCII version]
03.Apr.2010
amiga.org (Webseite)


ACube Systems announced Sam460ex
Press release:
Bassano del Grappa, Italy - 2nd April 2010

ACube Systems is happy to announce the new Sam460ex board. This board will join the Sam family together with the Sam440ep-flex. Based around the AMCC 460ex SoC, the board offers many modern features like: PCI express slots, SATA2 port, Giga Ethernet, DDR2 RAM.

This is the complete features list:
  • flex-ATX form factor (21.6 x 17 cm)
  • 8 layers PCB
  • AMCC 460ex SoC - up to 1.066 Ghz
  • max 2 GB DDR2 Ram - 200-pin SODIMM up to 533 Mhz
  • Silicon Motion SM502 embedded MoC (audio/video) max 64Mb Gfx RAM
  • Audio 5.1 Realtek ALC655 codec
  • PCI-express 4x lanes slot (16x mechanical connector)
  • PCI-express 1x lane slot (check notes below)
  • PCI slot, 32 bit, 66/33 Mhz, 3.3V
  • 1x SATA2 port (see notes below)
  • 6x USB2 EHCI/OHCI ports
  • 2x 10/100/1000 Ethernet ports
  • Lattice XP2 FPGA with 80 I/O pins expansion connector (optional)
  • UMTS/GSM module (optional requires add-on card)
  • 512 MB NAND Flash (optional)
  • integrated SD card reader
  • RTC clock
  • Serial port, 8-wires
  • I2C and SPI/I2C buses
  • passive cooling
  • U-Boot 2009.08

Notes: the SATA2 port and the PCI-e 1x slot are mutually exclusive, only one of them can be used at a time.

Price: the exact price will be announced when the board is available to the user (due the varying USD / EURO exchange rate) it will be in the range of EUR 600 - 650. The board will NOT replace the Sam440ex-flex board.

(Note of amiga-news: On the official website it was specified that the product will be available in "September 2010"). (cg) (Translation: dr)

[News message: 03. Apr. 2010, 02:38] [Comments: 0]
[Send via e-mail]  [Print version]  [ASCII version]
02.Apr.2010



A-EON: AmigaOne X1000 FAQ, part 3
In the second part of the FAQ on the AmigaOne X1000 some questions about the configuration were answered: The graphic board will be an ATI-product with R700-chipset and the "Common Firmware Environment" will be used as BIOS. There will be only complete systems with only one configuration.

Currently AmigaOS 4 cannot support the second processor core but this will follow with a forthcoming update of the operating system. (cg) (Translation: dr)

[News message: 02. Apr. 2010, 15:20] [Comments: 0]
[Send via e-mail]  [Print version]  [ASCII version]
1 225 445 ... <- 450 451 452 453 454 455 456 457 458 459 460 -> ... 465 662 864

.
Masthead | Privacy policy | Netiquette | Advertising | Contact
Copyright © 1998-2024 by amiga-news.de - all rights reserved.
.