02.Apr.2004
Ventzislav Tzvetkov (ANF)
|
Game: BoxWorld Gold version
Ventzislav Tzvetkov has released the Gold version of BoxWorld, a Sokoban clone where you have to replace boxes in order to advance to the next level (screenshot).
more ...
(snx)
[News message: 02. Apr. 2004, 07:23] [Comments: 0]
[Send via e-mail] [Print version] [ASCII version]
|
02.Apr.2004
Aminet (Website)
|
Aminet Uploads until 01.04.2004
Here are the newest Aminet-uploads since our last message:
more ...
(nba) (Translation: dr)
[News message: 02. Apr. 2004, 00:23] [Comments: 0]
[Send via e-mail] [Print version] [ASCII version]
|
02.Apr.2004
WHDLoad (Website)
|
WHDLoad: New packets until April 1st, 2004
With WHDLoad you can install games on your hard drive which had been originally written
for use only with disks. The following packets have been added or improved since our
last message:
more ...
(nba) (Translation: dr)
[News message: 02. Apr. 2004, 00:23] [Comments: 0]
[Send via e-mail] [Print version] [ASCII version]
|
01.Apr.2004
Andreas Magerl (ANF)
|
Issue 121 of the Online Magazine NoCover Appears
No fooling, on 1st April the beloved online magazine NoCover is punctual once again, with the release of issue 121, and has just been sent via email to all subscribers as well as posted on our homepage http://www.nc-mag.de and at http://www.apc-tcp.de. From here on out the magazine is available on Aminet and on Amiga Future CDROMs.
Have fun with the new NoCover, says
Wolf Zimmer
Cord Hagen
Andreas Magerl
(snx) (Translation: dm)
[News message: 01. Apr. 2004, 21:20] [Comments: 0]
[Send via e-mail] [Print version] [ASCII version]
|
01.Apr.2004
Carsten Siegner (ANF)
|
Multi-ADC (Analog Digital Changer) for Amiga, Pegasos and Amithlon
Here is an electronic diagram and a small test program for my six channel multi analog digital changer (download, 87 KB).
Characteristics of the ADC chip:
- Six measuring channels
- Programmable for unipolar (from 0V to +5V) and bipolar (-5V to +5V) measurements per channel
- Programmable reversal of the measurement polarity (only with bipolar)
- 12 bits resolution per channel
- programmable stand-by mode of the ADC
The following must be installed:
- rexxtricks
- tritonrexx
- triton.library
- rexxserdev
The following ENV variables should be inserted in the "ENVARC:" designation:
- Analog-device = serial device
- Analog-unit = serial unit
- Analog-Volt = maximal voltage reachable at the measurement entrances (normally "5")
Important:
The hardware (MultiADC) is fixed to a data rate of 15000 baud. If this data rate is changed on the computer there won't be any correct transfer of information.
The passive building elements (condensers and resistors) must be built exactly in accordance with the instructions. Deviating values in Ohms or Farad lead to an incorrect function of the MultiADCs.
All building elements are in CMOS technology. So one must wear an anti-static armband so as not to disturb the connection pins. Through this one is able to make it reliable.
With one's own, self-provided program one must pay attention to the programming of the chip LTC1293, since this deviates with the available hardware something from the data in the PDF document from this chip.
Example:
For a logical 1 at the data entrance of the LTC1293 chip one programs in ARexx "call serwrite(ser,'11111111'B,1)" and for a logical 0 it would be "call serwrite(ser,'00000000'B,1)."
(snx) (Translation: dm)
[News message: 01. Apr. 2004, 21:14] [Comments: 0]
[Send via e-mail] [Print version] [ASCII version]
|
| | |
| | |
